Listing details

Stinger Quad-Aer 3600 36″ Riding Aerator with Factory-Installed SeedBox

Stinger Quad-Aer 3600 36-Inch Riding Aerator With Factory-Installed SeedBox 36 This Quad-Aer 3600 comes with the SeedBox 36 installed at the factory, making Stinger’s 36-inch riding aerator a one-pass renovation machine. Seed drops through a baffled chute across the full 36-inch working width as the tines pull cores up to 4 inches deep, at up to 10 mph behind a 30.5 hp Kawasaki FX781V EVO. SeedBox 36 Controls on the Quad-Aer 3600 Seed flow is set with the controller’s arrow keys, on a scale from 1 to 70. Press AUTO and the display reads AU, and seed flows only while the tines are down; in manual mode the power button alone starts and stops it. Holding AUTO with the up or down arrow raises or lowers the display brightness, and OF on the display means every mode is off. Filling the Quad-Aer 3600’s SeedBox Take the ignition key out before filling the hopper, fasten the lid down, then put the key back and switch on. Stinger’s seed chart gives the starting setting for each seed type, which the operator enters with the arrow keys before the first pass. Quad-Aer 3600 SeedBox Figures Engine: Kawasaki FX781V EVO, 30.5 hp Seeding width: 36 in Tine depth: up to 4 in Ground speed: 10 mph forward, 3 mph reverse Seed settings: 1 to 70 Hydraulic oil: up to 12 qt synthetic 15W-50 Drive tires: 20 x 8-10 Quad-Aer 3600 SeedBox or a 30-Inch SeedBox Rider For crews whose properties suit a 30-inch machine, the Quad-Aer 3000 and GT30 are also built with a factory SeedBox 30. The 3600 version seeds and cores a 36-inch swath at up to 10 mph. Stinger also sells the SeedBox 36 Gen 2 as a separate attachment for the Quad-Aer 3600, and its 50 lb weight kit is listed for the 3600 with or without the SeedBox. · Stinger